The DI Pod Mini is a compact, wall-mount modular deionization system which is designed for water purification in laboratories, aquariums and a variety of other processes requiring deionized water. It’s clear quick-connect cartridge allows the user to see when the DI resin is exhausted which is indicated by a color change of the media. Spring-loaded cartridge is easily removed and replaced in a matter of seconds, without tools.
- Designed to function as a single unit or can be installed in series or parallel to achieve varying degrees of water quality and flow rates.
- The water flows in the top and out the bottom (shut-off valve included).
- Available as a High Purity Mixed Bed for Highest Quality – typically for labs or Spot-Free Rinses.
- Available as a High Capacity Mixed Bed for Highest Quantity – typically for Reefkeeping.
- The high capacity cartridges provide better than 20 Kilo-Ohms and the speckled purpled resin changes to amber as the resin capacity becomes exhausted.
- High purity color changing mixed bed filters provide a resistivity greater than 10 MegOhm and distinctively change from blue to amber upon exhaustion.
- Operates at low pressure – typically 5 to 30 psi – a pressure reducing valve is recommended.
- Flows up to 0.5 gpm per DI Pod – higher flow rates can be achieved with multiple pods
- It is recommended that this system be fed with Reverse Osmosis water which increases the cartridge capacity by up to 900% (see table below).
- Made in USA
DI Pod Mini Cartridge Capacity | ||
---|---|---|
Feedwater Total Dissolved Solids (TDS) | High Purity DI Cartridge Gallons Treated | High Capacity DI Cartridge Gallons Treated |
10 ppm | 1,500 Gallons | 1,800 Gallons |
100 ppm | 155 Gallons | 180 Gallons |
300 ppm | 50 Gallons | 60 Gallons |
500 ppm | 30 Gallons | 35 Gallons |
Specifications
- Dimensions: 23″ H x 3.5″ W x 3.5″ D
- Weight: 5.5 Pounds
- Construction: Painted Carbon Steel
- Flow Rate: 0.5 gpm (per DI Pod)
- Maximum Pressure: 30 PSI
- Inlet / Outlet: 1/4″ Tube Fitting
- Valve: 1/4″ tube x 1/4″ tube
- Mounting: Wall Mounted
- Plastic Parts: Non-Pigmented ABS
- Spring: Stainless Steel
- Color: Beige

Reviews
There are no reviews yet.