Econ Stennicator Proportional Pump 1:128 Medicator
The Stennicator is a compact, proportional pump for livestock operations requiring a dosage ratio of 1:28. It functions as a medicator and dispenses iodine, vaccines, acids, chlorine, electrolytes and more. The pump accepts a signal from a water meter providing a dry contact at a rate of 1 or 10 ppg or 1 ppl and injects directly into the water line. The Stennicator also features a signal repeater relay that can repeat the incoming signal to another Stennicator, controller or other device. When utilizing a house controller, the standby setting stops the pump from injecting but it still sends the water signal to the controller.
- Compact and easy to install, the Stennicator accepts a pulse from a dry contact water meter. Adjustable to accept a signal from a 1 or 10 pulse per gallon (ppg) or 1 ppl (liter). The standby mode continues to send pulse to house controller.
- Injects directly into line eliminating water flow restriction
- Stock solution does not contact any moving parts
- Unaffected by water quality, scale or solids
- A second pump can be added to handle higher flow rates (5.4 gpm)
- Easily serviced with effortless tube replacement
One Stennicator is utilized when the water consumption is less than 3,000 gallons per day at a water flow of 2.7 gallons per minute. Two Stennicators are utilized to achieve 1:128 dosing for water consumption for more than 3000 gpd at a water flow up to 5.4 gallons per minute.
Features
- On/off switch
- Brushless motor
- Totally enclosed
- 3-point roller design assists in anti-siphon protection
- Pump head requires no valves, allows for easy maintenance
- Self-priming against maximum working pressure foot valve not required
- Pump does not lose prime or vapor lock
- Pumps off-gassing solutions and can run dry
- Output volume is not affected by back pressure
- Easy to change pump tube; lubrication is not required
- All pump accessories included allow a fast and easy installation
- UL & cUL for indoor & outdoor use
Accessory Kit Shipped With Each Pump
- 3 connecting nuts 1/4″
- 3 ferrules 1/4″
- 1 injection check valve 80 psi (5.5 bar)
- 1 weighted suction line strainer 1/4″
- 1 20′ roll suction/discharge tubing 1/4″ white
- 1 additional pump tube
- 1 manual
Reviews
There are no reviews yet.