Matrixx Drop 1.5″ Smart Commercial Water Softening System
$96.59
Free shipping within 3 days
Easy returns within 30 days
Shopping information security
In any field of endeavor, progress is not always linear. For the past forty (40) years, progress in the area of Commercial Water Softening has been Evolutionary… at best!
Evolution in Commercial Water Softening included fiberglass resin tanks that were stronger than steel and not corrosive. Space-age polymers have made valves and resins to be extraordinarily strong and reliable, and meter controls provided even greater levels of efficiency. It was all about Evolution until Drop Technology created The Revolution in Commercial Water Softening.
Revolutionary Game-Changing Drop Technology
• Reduces Capital Costs – Saves 35% to 50% in Up-Front Costs
• Reduces Operating Costs – Cuts Salt and Wastewater Usage by 40% to 55%
• Reduces Space Requirements – Smaller Footprint Saves Valuable Real Estate
• Reduces Installation Costs – No Wiring (MAV) Valve, No Meter
• Reduces Programming – Programmed on Your Computer, or Smart Device (no climbing up on stepladders, one-step programming, no matter how many tanks)
How Drop Technology Works
• The heart and the brain of the Matrixx Drop System is the Drop Smart Hub, which integrates all parts of your commercial water system. Using low-frequency radio waves, it communicates directly with any Drop Equipped device
• The Drop Hub monitors all water systems devices 24/ 7/ 365 to make sure they are working properly. Then, through your standard home WiFi, it notifies you through the Drop app, when you have a leak, need to add salt or if you have an unusual flow rate (such as a leak or toilet running continuously)
• When a problem arises, the Drop App alerts you of things like, when it is time to add salt, or if you have a leak, whether it be sensing an unusual constant flow or detecting moisture (from a moisture sensor)
More Than A Water Softener A Total Water Management System for Any Business
There are two things that need to be articulated here:
1. This is a water softener, but it is a whole lot more than that.
2. It will cost less to purchase and operate than any comparable system.
Single-Tank or Multiplex System
• The single tank water softener comes with a Bypassing Piston. That simply means that you will have soft water, except during regeneration, in which case the bypassing piston delivers unsoftened water during that interval
• The multiplexing water softeners come with a non-bypassing system. That means that you will have soft water 100% of the time, even during intervals when softeners are regenerating
• Each Drop Hub can control up to 12 water softeners, 12 backwashing filters and up to 24 other devices. We offer systems from single tank to 5 tanks multiplex, but can custom-engineer up to 12 softener tanks if needed
Leak Detection and Flood Prevention
It’s a fact that you are seven or eight times more likely to have a floor or water damage in your business than you are to have it burglarized. Most businesses have security systems to prevent burglary but have nothing to prevent floods or water damage. The Matrixx Drop changes all of that with it’s Dual Leak Detector: (1) It senses unusual flow rates and alerts you to such on your smartphone. You can decide whether you want the system to shut down to prevent water damage; and (2) You can put up to 32 leak detectors in vital places throughout your plant or business. When they sense wetness, they also notify you and shut off the water. You can decide what happens at that point.
Disruptive Technology
The 1.5″ Matrixx Drop Commercial Water Softener System operates in conjunction with your WiFi System and is fully programmed by an App on your Smartphone,
Each tank and tank size has a peak flow of 50 GPM, which means that its continuous flow is 25 GPM per tank. So, if you need 100 GPM Peak Flow, you would utilize three tanks. Why three (instead of two)? Each tank monitors flow and water usage. When a tank is exhausted (time to regenerate), it immediately goes off-line and regenerates. Its no-hard water bypass prevents untreated water from entering your site, and its built-in lock-out assures that only one tank can regenerate at a time.
This design assures you that the system can accommodate fluctuations in demand without bleeding any hard water to service while conserving salt and water.
In periods of low flow, the Drop App automatically takes tanks offline, to prevent hardness bleed-through from “channeling of the resin.” However, unlike most other systems, which always have one tank offline, the Drop system can have all tanks in service… except when one is regenerating, so that high flow rates are sustainable.
What Tank Size is Best?
Bigger is not always better, but when in doubt, go bigger. The 18″ diameter tank has 5 cubic feet of resin which is rated at 150,000 grains, while the 21″ diameter tank has 7 cubic feet of resin which is rated at 210,000 grains (30,000 grains per cu/ft). Therefore, for the sake of comparison, let’s assume that your water is 20 grains of hardness, here are your regeneration capacities:
Regardless of what your hardness is, you simply divide the grain capacity of the unit by the hardness to find the total number of gallons you will get between regenerations. The 6 or 8-pound economy settings are typically used in many applications such as hotels, restaurants, and some manufacturing. However, for very soft water, you may want to use the 10-pound salt setting and for higher-quality soft water, and the 15-pound setting is needed to eliminate virtually any hardness leakage such as in boiler feed water.
Be the first to review “Matrixx Drop 1.5″ Smart Commercial Water Softening System”
Related products
Reviews
There are no reviews yet.